fb2CG@V7580 2x100GE FPGA Card | Silicom Denmark | FPGA Solutions

fb2CG@V7580

100G FPGA Card - Dual CFP4 port card supporting 2x100GE, PCIe Gen3 2 x8 lanes

General Details

fb2CG@V7580 – 100G FPGA Card- Dual CFP4 port card supporting 2×100 Gigabit Ethernet, PCIe Gen3 2 x8 lanes

The fb2CG@V7580 100G FPGA Card is a high performance OEM hardware platform intended for 100G Ethernet with CFP4 network interface.

The standard configuration is based on Xilinx Virtex 7 H580T FPGA. The card is also offered with a variety of different FPGAs to provide flexibility for the intended application.

Specifications
fb2CG@V7580 -100G FPGA Card

HOST INTERFACE
Physical bus connector: 16-lane PCIe
PCIe bus type: 1-8 lane PCIe Gen1/Gen2/Gen3
Support up to 2 x 8 lane bifurcation PCIe Gen3

NETWORK INTERFACE
IEEE 802.3 100 Gbit/s Ethernet
Physical interface: 2 x CFP4 port
Supported CFP4 modules: Including fan-out modules for 4 x 25 G, Multimode SR (850 nm), singlemode LR (1 31 0 nm), multimode LRM (1 31 0 nm), or Direct Attached Copper (Twinax)
Data rate: 100 Gbit/s or 4 x 25 Gbit/s
Ethernet PHY directly embedded in FPGA

CONFIGURATION
16 bit fast parallel programming interface from supporting preprogrammed controller
Configuration flash supports two boot images with automatic fallback to fail safe image if first image fails
Upload of FPGA configuration to flash via PCIe
Support for encrypted FPGA bit file (optional)

ON BOARD MEMORY, FPGA SYSTEM
1 MB user configurable space in flash for permanent storage
3 x 64 bit DDR3@1800MT/s 4GB (12 MB in total)

ON BOARD CLOCK
PCIe clock: 100MHz
125 MHz oscillator
156.25 MHz oscillator
322.265625 MHz oscillator

FPGA
fb2CG@V7580: Xilinx Virtex7 XC7VH580T-2
Xilinx Virtex7 XC7VH580T-3 (optional)
Xilinx Virtex7 XC7VH870T-2 (optional)
Other speedgrades available on request

ENVIRONMENT
Physical dimensions: Half length, standard height PCIe
Power consumption: Less than 7W with uninitialized FPGA
Operating temperature: 0 – 55°C, 30 – 130°F
Operating humidity: 20 – 80%
Hardware compliance: RoHS, CE
Passive cooling (no on-board fan required)
Active cooling (optional)

ADDITIONAL BOARD SUPPORT
On board temperature sensor
Board status LED
8 user FPGA controlled dual color LED for Link/Activity and other status
PPS clock synchronization connector

ADDITIONAL INTELLECTUAL PROPERTY SUPPORT
Flash configuration I/F
DDR3 memory controller
8 lane PCIe
DMA for 2 x 8 lanes Gen3 (optional)
100G Ethernet MAC and PCS/PMA (optional)
MDIO controller (optional)
I2C controller (optional)
SPI master I/F (optional)
TCP-offload engine (optional)

Order Enquiry

Your Name (required)

Your Email (required)

Company name

Title

Location

Phone

Your Message